Insulated Kennels
At Haborn Products Ltd we specialise in insulated dog kennels and catteries. We build our kennels and catteries from insulated panels that are between 45mm and 70mm in thickness, which is a U-Value of up to 0.31. We also use insulated roofing panels of around 100mm, this completely stops the condensation building up and dripping onto the dogs or cats, which is what happens with thinner insulated roofing.
We trim our kennels with galvanised sheet trim, which gives them stylish finish.
Our insulated blocks can be with or without internal corridors. See examples below. We build our corridors to a standard size of 1.2m wide, as this meets regulations if you run a business with staff members.
The insulated blocks come with:
- Sliding Hatches or cat flaps
- Access doors, made from the same insulated paneling as the wall.
- UPVC windows – these are optional
- Indoor sleeping areas, separated by dividing panel, with plastic walls
- Outdoor runs covered with fibre-glass roofing.
All our insulated blocks can be made bespoke to your requirements, as you can see on this page that we build to suit our customers needs.
We offer a free design service if you are interested in seeing what you can have with the space you have available.
Project example 1:
20 Block of fully insulated kennels with 20 half covered outdoor runs with an internal corridor, and a prep room at the back:
- 20 internal sleeping areas at 1.35m x 2.8m
- 20 outdoor runs covered with fibreglass roofing and guttering at 1.35m x 4m
- Internal corridor
- Sliding hatches operated with a wired pulley system
- uPVC windows
This example had internal and external drainage built into the concrete for easier cleaning.
Project example 2:
7 Block with internal corridor built on a concrete pad that was 14m x 7m, this example had:
- 1.2m wide internal corridor
- 7 UPVC windows
- 5 x 1.8m wide runs
- 2 x 2.4m wide runs
- 7 internal sleeping areas
- 7 outdoor runs covered with fibreglass roofing and guttering.
- Sliding hatches operated with a wired pulley system
Project example 3:
5 Block with internal corridor and large prep room, built on a concrete pad that was 14m x 7m, this example had:
- 1.2m wide internal corridor
- 6 UPVC windows
- 5 x 2m wide runs
- Large 7m x 4m prep room
- 5 internal sleeping areas
- 5 outdoor runs covered with fibreglass roofing
- Sliding hatches operated with a wired pulley system
Project example 4:
4 Block without an internal corridor, built on a concrete pad that was 8m x 5m, this example had:
- 4 UPVC windows
- 4 x 2m wide runs
- 4 x 2 x 1.2m internal sleeping areas
- 4 x 2.4m x 2m outdoor runs covered with fibreglass roofing
- Sliding hatches operated with a wired pulley system
Project example 5:
8 Block with an internal corridor, built on a concrete pad that was 10m x 6m, with a rear area that had an extra kennel and run, this example had:
- 1.2m wide internal corridor
- 2 UPVC windows
- 8 x 1.5m wide runs
- 8 internal sleeping areas
- 8 outdoor runs covered with fibreglass roofing
- Sliding hatches operated with a wired pulley system
This particular project was built after the original wooden building was knocked down. We designed the new building to fit on the existing brick line.
More examples
-
- Single Block
-
- Single Block
-
- 2 Block
-
- 2 Block
-
- Twin Block
-
- 2 Block
-
- 6 Block with Prep room
-
- 8 Block outside
-
- 8 Block back
-
- 8 Block inside
-
- 8 Block bed areas
-
- 8 block runs
